TM100 & TM100HF Specifications:

Used for single blend long draw beer systems. Best for dispensing one style of beer. Blends CO2 and N2 to your specifications.

Size: 9.5" wide (including mounting flanges x 10" high x 4.5" deep

Hook-Up: Two inlet lines and one outlet line.

Fittings: Panel comes with standard 1/4" female NPT fittings. Hose barbs available at no additional costs. Specify size: 1/4", 5/16", and 3/8".

Accuracy and Flow Range: Maintains accuracy of +/- 2% of full scale or better within the flow range of .4 to 40 liters per minute (.85 to 85 cubic feet per hour).

Standard Blender: Up to 15 kegs/hr. dispensed.

High Flow Blender: Up to 30 kegs/hr. dispensed. Used for systems requiring only one blend of C02 and N2 that operate with higher than usual gas flow.

Inlet Pressures: 55-150 psi, however, panel can be set to match any conditions. Blender tuned at inlet pressure of existing system. Standard 55 and 70 psi.

Outlet Pressures: Adjustable outlet pressures of 0-60 psi. The maximum outlet pressure will always be 10 psi lower than the lowest inlet pressure. The panel can also be ordered with outlet pressure set to custom ranges.

Retail Price for the TM100 is $499.00 & for the TM100HF is $560.00.

TM100 - High Flow

TM200

TM200 & TM200HF Specifications:

Used for systems that dispense more than one type of beer requiring two separate blends of CO2 and N2.

Size: 9.5" wide (including mounting flanges x 10" high x 4.5" deep

Hook-Up: Two inlet lines and two outlet lines.

Fittings: Panel comes with standard 1/4" female NPT fittings. Hose barbs available at no additional costs. Specify size: 1/4", 5/16", and 3/8".

Accuracy and Flow Range: Maintains accuracy of +/- 2% of full scale or better within the flow range of .4 to 40 liters per minute (.85 to 85 cubic feet per hour).

Standard Flow: Up to 30 kegs/hr. dispensed.

High Flow Blender: Up to 60 kegs/hr. dispensed. Used for systems requiring two blends of C02 and N2 that operate with higher than usual gas flow.

Inlet Pressures: 55-150 psi, however, panel can be set to match any conditions. Blender tuned at inlet pressure of existing system. Standard 55 and 70 psi.

Outlet Pressures: Adjustable outlet pressures of 0-60 psi. The maximum outlet pressure will always be 10 psi lower than the lowest inlet pressure. The panel can also be ordered with outlet pressure set to custom ranges.

Retail Price for the TM200 is $735.00 & for the TM200HF is $890.00.

TM200 - High Flow

1/4" Tee with Check Valve

MV013 1/4" Tee with Check Valve

Protects Blender from being filled with water when the Blender is being using in conjunction with a Soda Carbonator.

Our policy is that only those blenders installed with the check valve are protected by our warranty against water damage.

Use with 1/4" braided tube.

Retail Price for the MV013 1/4" Tee is $12.99.

Beer Check

MV020 Beer Check with Adaptor
MV022 Beer Check with Adaptor & Leak Sensor

This revolutionary gas analyzer, manufactured by O2 Technologies, is a hand-held gas analyzer that accurately measures several combinations of gases and offers an optional Leak Sensor.

The Beer Check can analyze:
CO2 in N2 - Use to check mixed gas blends used in brewing and dispense.
CO2 in Air - Use for Brewers who purge kegs and tanks with CO2.
O2 in N2 - Use to check nitrogen generators and for purging kegs or tanks with nitrogen.
Leak Sensor - The Beer Check is the only electronic Leak Sensor we have heard of that detects nitrogen leaks. In 12 years of working with analyzers, we have never seen anything like it.

An adaptor by McDantim fits a standard 7/8-14 beer nut (same as keg coupler) is included with the MV020 and MV022 packages.

Retail Price for the MV020 Beer Check is $575.00 & for the MV0222 Beer Check with Leak Sensor is $710.00.